Filter
Top Products
32
“
Troubleshooting
Problem
You cannot store a name
and phone number in the
phone book.
While programming or
searching, the handset
starts to ring and stops the
program/search.
The handset does not
display the caller’s name
and/or phone number.
The display goes to the
standby mode while viewing
the Caller List.
When a second call is
received during a
conversation, the unit does
not display the new caller’s
name and/or phone number.
(HANDSET\LOCATOR) does
not function.
Cause and Remedy
≥You cannot store an item in the phone
book while the unit is in the talk mode.
≥Do not pause for over 60 seconds while
storing.
≥To answer the call, press .
Start again from the beginning after
hanging up.
≥You need to subscribe to a Caller ID
service.
≥Other telephone equipment may be
interfering with your phone. Disconnect
it and try again.
≥Other electrical appliances connected to
the same outlet may be interfering with
the Caller ID information.
≥Telephone line noise may be affecting
the Caller ID information.
≥Do not pause for over 60 seconds while
searching.
≥The caller requested not to send his/her
information. See page 14.
≥The handset is too far from the base unit.
≥The handset is engaged in an outside
call. Wait until the IN USE/CHARGE
indicator light goes out.
(––
–
/FLASH)