Filter
Top Products
Phone Book
20
You can store up to 10 names and phone numbers in the phone book.
Using the phone book, you can make a call by selecting a name on the
handset display.
Storing Names and Numbers
Make sure the unit is in the standby mode.
1
Press (AUTO/PROGRAM).
2
Press a memory station number ((0) to (9)).
≥If an item is already stored, that information is
displayed.
3
Press (EDIT).
4
Enter a name, up to 15 characters, using
the dialing buttons ((1) to (9)), (›) or (‹).
≥See the steps for entering names and symbols
(p. 21).
≥If a name is not required, press (EDIT) and go
to step 6.
5
Press (EDIT).
6
Enter a phone number, up to 24 digits.
≥Each time you press (MUTE/CLEAR), the digit
is erased from the right. To erase all of the
digits, press and hold (MUTE/CLEAR).
≥To show the cursor, press (›) after entering a
digit. Each time you press (MUTE/CLEAR),
the digit under the cursor is erased.
≥When you store the last number dialed, press
(PAUSE/REDIAL) instead of entering a phone
number.
7
Press (EDIT) to save.
≥A beep sounds.
≥The handset will return to the standby mode.
≥If a pause is required for dialing, (PAUSE/REDIAL) can be stored in a phone
number counting as one digit (p. 26) in step 6.
≥You can exit the programming mode at any time by pressing (OFF).
≥If you do not press any buttons for 60 seconds, the unit will return to the standby
mode.
EMPTY
ENTER NAME :
TOM
ENTER NUMBER :
SELECT STATION#
TOM
TOM