Filter
Top Products
For assistance, please call: 1-800-211-PANA(7262)
“
21
Advanced Operation
For example, to enter “TOM”:
1
Press (AUTO/PROGRAM).
2
Press a memory station number ((0) to (9)).
3
Press (EDIT).
4
Press (8).
5
Press (6) three times, then wait for
3 seconds.
6
Press (6).
7
When finished, press (EDIT) to save.
≥Follow steps 6 and 7 on page 20 to
complete the operation.
≥If you enter a blank, press (1).
≥To show the cursor, press (›) after entering a character. While entering names,
the cursor will flash on the display.
TOM
(1)
(2)
(3)
(4)
(5)
(6)
1234
Number of times key is pressed
Entering Names and Symbols
The handset dialing buttons ((1) to (9)), (›) and (‹) can be used to enter
letters and symbols. The letters are printed on the dialing buttons.
Pressing each button selects a character as shown below.
≥To show the cursor, press (›) after entering a character.
≥To enter another character using the same dialing button, press ($) or wait for
3 seconds.
If you make a mistake while entering a name
Use (›) or (‹) to move the cursor to the incorrect character, press
(MUTE/CLEAR) to delete and enter the correct character. Each time you
press (MUTE/CLEAR), a character under the cursor is erased.
To erase all characters, press and hold (MUTE/CLEAR).
T
Keys
Blank – ¢ !
ABC (
DE F )
GH I "
JKL ’
MNO ;
ENTER NUMBER :
ENTER NAME :
TO
(7)
(8)
(9)
(›)
(‹)
1234
Number of times key is pressed
Keys
PQRS
TUV?
WX Y Z
To move the cursor to the left
To move the cursor to the right