Filter
Top Products
19
Basic Operation
For assistance, please call: 1-800-211-PANA(7262)
Erasing Caller List Information
After checking the Caller List, you can erase some or all of the entries.
Make sure the unit is in the standby mode.
To erase a specific caller from the Caller List
1
Lift the handset off the base unit and
press (›) or (‹) to enter the Caller List.
2
Scroll to the caller you want to erase from
the Caller List by using (›) or (‹).
3
Press (MUTE/CLEAR).
≥A beep sounds and the information is
erased.
≥After a few seconds, the display will show
the next or previous caller information.
To erase all entries in the Caller List
Before erasing all entries, make sure that “ ” is not displayed in the
recent Caller List.
1
Lift the handset off the base unit and
press (›) or (‹) to enter the Caller List.
2
Press and hold (MUTE/CLEAR) until
“CLEAR ALL CID?” is displayed.
≥“CID” stands for Caller ID information.
3
Press (MUTE/CLEAR).
≥A beep sounds and all entries are erased.
≥The handset will return to the standby mode.
CLEARED
CLEAR ALL CID?
REAGAN,TOM
NO ITEMS STORED