Panasonic KX-UT136 Telephone User Manual


 
Setting Description Value Range Default
VLAN ID Specify the VLAN ID. 1–4094 1
Priority Specify the priority of packets sent
from this unit.
0–7 0
Speed/Duplex Select the connection mode
(combination of link speed and
duplex mode) of the LAN port and PC
port.
LAN port Select the connection mode of the
LAN port.
Auto, 10M-Full,
10M-Half,
100M-Full,
100M-Half
Auto
PC port (KX-UT123/
KX-UT133/KX-UT136
only)
Select the connection mode of the
PC port.
Auto, 10M-Full,
10M-Half,
100M-Full,
100M-Half
Auto
Embedded web Enable or disable Web User
Interface Programming.
On, Off On
*1
Press [ ] and [ ] to switch between these items.
Network Test
Setting
Description Value Range Default
Network Test Confirm whether other network
devices (e.g., SIP server, routers,
switching hubs) respond to network
requests. When you select this item,
enter the IP address of the device to
which you want to test the
connection.
If a device does not respond, first
check the unit's network settings, and
then check the device's network
settings and connection.
xxx.xxx.xxx.xxx
Default Setting
IMPORTANT
We recommend configuring these settings with your administrator or dealer. Contact your administrator or
dealer for further information.
44 Operating Instructions Document Version 2011-06
Customizing the Telephone