Filter
Top Products
Programming through the Web User Interface
40
Programming through the
Web user interface
You can program the following features through
the Web user interface. The password is required.
Contact your administrator for further information.
– Network settings
– Call forward (page 29, 36)
– Do not disturb (page 30, 37)
– Block anonymous calls (page 30, 37)
– Call block
*1
(page 30, 37)
– Anonymous calls (Block Caller ID) (page 31, 38)
– Updating the base unit software
*2
(page 32, 38)
*1 This feature is explained as “Call Rejection
Phone Numbers” in the Web user interface.
*2 This feature is explained as “Firmware Update”
in the Web user interface.
Embedded Web
You need to activate the Web user interface every
time you program features using a computer. The
Web user interface is deactivated after setting on
the computer.
The default setting is “Off”.
1 {MENU} (center of joystick) i
{#}{5}{3}{4}
2 {V}/{^}: Select the desired setting.
3 {SAVE} i {OFF}
1 {MENU} (middle soft key) i {# }{5}{3}{4}
2 {V}/{^}: Select the desired setting.
3 {SAVE} i {EXIT}
Y Handset
: Base unit