Filter
Top Products
Useful Information
32
Error messages
If the unit detects a problem, one of the following messages is shown on the display.
Display message Cause/solution
Busy
or
System is busy. Please
try again later.
L The called handset is in use.
L Other units are in use and the system is busy.
Try again later.
L The handset you are using is too far from the
base unit. Move closer and try again.
L The handset’s registration may have been
canceled. Re-register the handset (page 24).
Check tel line L The supplied telephone line cord has not been
connected yet or not connected properly. Check
the connections (page 9).
Dial locked L Dial lock is turned on. To turn it off, see page 15.
Don’t use this
battery.
L A wrong type of batteries such as Alkaline or
Manganese was inserted. Use only the
rechargeable Ni-MH batteries noted on page 4,
10.
Error!! L The handset’s registration has failed. Move the
handset and base unit away from all electrical
appliances and try again.
L The entered password was wrong in
programming dial lock. Enter the correct
password.
Insert battery L The handset was placed on the base unit or
charger without batteries. Insert the batteries
properly (page 10).
Invalid L There is no handset registered to the base unit
matching the handset number you entered.
L The handset is not registered to the base unit.
Register the handset (page 24).
No link to base.
Reconnect AC adaptor.
L The handset has lost communication with the
base unit. Move closer to the base unit and try
again.
L Unplug the base unit’s AC adaptor to reset the
unit. Reconnect the adaptor and try again.
L The handset’s registration may have been
canceled. Re-register the handset (page 24).
Phonebook full L The phonebook memory is full. Erase
unnecessary entries (page 17).
TG9361BX(e)_OI.book Page 32 Wednesday, April 16, 2008 3:08 PM