Filter
Top Products
Preparation
12
handset on the base unit or charger
and let it charge for at least 7 hours.
Symbols used in these
operating instructions
Setting up the unit
before use
Dialing mode
If you cannot make calls, change this
setting according to your telephone line
service. The default setting is “Tone”.
“Tone”: For tone dial service.
“Pulse”: For rotary/pulse dial service.
1 {MENU} i {#}{1}{2}{0}
2 {V}/{^}: Select the desired setting.
3 {Save} i {OFF}
Date and time
1
{MENU} i {#}{1}{0}{1}
2 Enter the current date, month, and
year by selecting 2 digits for each.
Example: 15 July, 2008
{1}{5} {0}{7} {0}{8}
3 Enter the current hour and minute
(12-hour clock format) by selecting 2
digits for each.
Example: 9:30
{0}{9} {3}{0}
4 {AM/PM}: Select “AM” or “PM”.
5 {Save} i {OFF}
Note:
L To correct a digit, press {^}, {V}, {<},
or {>} to move the cursor to the digit,
then make the correction.
L The date and time may be incorrect
after a power failure. In this case, set
the date and time again.
Symbol Meaning
{} The words in the
brackets indicate
button names/soft key
names on the handset
and base unit.
Example:
Unit keys: {C}, {OFF}
Soft keys: {View CID},
{Phonebook}
i Proceed to the next
operation.
“” The words in
quotations indicate the
menu on the display.
Example: “Alarm”
{V}/{^}:
“”
Press {V} or {^} to
select the words in
quotations.
Example:
{V}/{^}: “Off”
TG9361BX(e)_OI.book Page 12 Wednesday, April 16, 2008 3:08 PM