Filter
Top Products
Programming
23
L If you have set the alarm, the alarm
sounds even if the night mode is
turned on.
Setting the start and end time
1 {MENU} i {#}{2}{3}{7}
2 Enter the desired hour and minute
you wish to start this feature.
3 {AM/PM}: Select “AM” or “PM”. i
{V}
4 Enter the desired hour and minute
you wish to end this feature.
5 {AM/PM}: Select “AM” or “PM”.
6 {Save} i {OFF}
Note:
L To correct a digit, press {^}, {V}, {<},
or {>} to move the cursor to the digit,
then make the correction.
Turning night mode on/off
1 {MENU} i {#}{2}{3}{8}
2 {V}/{^}: Select “On” or “Off”. i
{Save} i { OFF}
Note:
L When the night mode is turned on,
“Night mode” is displayed during
the selected period.
Alarm
You can set one of 2 different alarm
options (once or daily) at a time for each
handset. An alarm sounds at the set time
for 1 minute.
You can choose an alarm sound from 3
tones and 4 melodies.
Important:
L Set the date and time beforehand
(page 12).
1 {MENU} i {#}{7}{2}{0}
2 {V}/{^}: Select the desired alarm
option. i {Select}
3 Set the desired time. i {OK}
4 {V}/{^}: Select the desired ringer
tone. i {Save}
L If you set a tone or melody, we
recommend selecting a different
one for outside calls.
5 {OFF}
Note:
L To stop the alarm, press any dial key
or place the handset on the base unit
or charger.
L When the handset is in use, the alarm
will not sound until the handset is in
standby mode.
L If you select “Once”, the setting
changes to “Off” after the alarm
sounds.
L When the ringer volume for outside
calls is set to off (page 20), the alarm
sound is heard at a low level.
Registering a unit
Operating additional
handsets
Additional handsets
Up to 6 handsets can be registered to
the base unit.
Important:
L See page 4 for information on the
available model.
Off Turns alarm off. Go to
step 5.
Once An alarm sounds once at
the set time. Enter the
desired date, month, and
year.
Daily An alarm sounds daily at
the set time.
TG9361BX(e)_OI.book Page 23 Wednesday, April 16, 2008 3:08 PM