Filter
Top Products
Programming
18
Programmable settings
You can customize the unit by programming the following features using the handset.
To access the features, there are 2 methods:
– scrolling through the display menus (page 18)
– using the direct commands (page 20)
L Mainly the direct command method is used in these operating instructions.
Programming by scrolling through the display menus
1
{MENU}
2 Press {V} or {^} to select the desired main menu. i {Select}
3 Press {V} or {^} to select the desired item in sub-menu 1. i {Select}
L In some cases, you may need to select from sub-menu 2. i {Select}
4 Press {V} or {^} to select the desired setting. i {Save}
L This step may vary depending on the feature being programmed.
L To exit the operation, press {OFF}.
Note:
L See page 20 for the default settings.
Main menu Sub-menu 1 Sub-menu 2 Page
Block calls
*1
––22
Night mode On/Off –23
Start/End –23
Ringer setting Ringer volume ––
Ringer tone ––
Set date & time Date and time
*1
–12
Alarm –23
Time adjustment
*1,
*2
––
Dial lock
*1
––15
Initial setting LCD contrast ––
Key tone ––
Auto talk –13
Set area code
*1
–26
Set tel line Set dial mode
*1
12
Set flash time
*1
14
Set line mode
*1
–
Registration HS registration 24
Deregistration 24
TG9361BX(e)_OI.book Page 18 Wednesday, April 16, 2008 3:08 PM