Filter
Top Products
Useful Information
45
Liquid damage
Caution:
L To avoid permanent damage, do not use a microwave oven to speed up the drying
process.
I cannot send or
receive SMS
messages.
L You have not subscribed to the appropriate service.
Contact your service provider/telephone company.
L The SMS message centre number(s) are not stored or
are incorrect. Store the correct numbers (page 33).
L Message transmission was interrupted. Wait until the
message has been sent before using other telephone
functions.
L If you use a DSL/ADSL service, we recommend
connecting a DSL/ADSL filter between the base unit
and the telephone line jack. Contact your DSL/ADSL
provider for details.
“FD” is displayed. L The unit could not connect to the SMS message
centre. Confirm that the correct SMS message centre
numbers are stored. Confirm that SMS is turned on
(page 33).
“FE” is displayed. L An error occurred while sending the message. Try
again.
“E0” is displayed. L Your phone number is permanently withheld or you
have not subscribed to the appropriate service.
Contact your service provider/telephone company.
Problem Cause/solution
Liquid or other form of
moisture has entered
the handset/base unit.
L Disconnect the AC adaptor and telephone line cord
from the base unit. Remove the batteries from the
handset and leave to dry for at least 3 days. After the
handset/base unit are completely dry, reconnect the
AC adaptor and telephone line cord. Insert the
batteries and charge fully before use. If the unit does
not work properly, contact an authorised service
centre.
Problem Cause/solution
TG8511_19BX(e).book Page 45 Thursday, July 8, 2010 5:44 PM