Filter
Top Products
Caller ID/Talking Caller ID
Problem Cause/solution
Caller information is not
displayed.
R You must subscribe to Caller ID service. Contact
your service provider/telephone company for
details.
R If your unit is connected to any additional
telephone equipment such as a Caller ID box or
cordless telephone line socket, plug the unit
directly into the wall socket.
R If you use a DSL/ADSL service, we recommend
connecting a filter (contact your DSL/ADSL service
provider) to the telephone line between the base
unit and the telephone line socket. Contact your
DSL/ADSL provider for details. (for Australia)
R If you use a DSL/ADSL (JetStream) service, we
recommend that you contact your DSL/ADSL
service provider to have a DSL/ADSL Splitter
installed. We do not recommend the use of
generic DSL/ADSL filters. Contact your DSL/ADSL
service provider for details. (for New Zealand)
R Other telephone equipment may be interfering with
this unit. Disconnect the other equipment and try
again. (for Australia)
R Other telephone equipment such as a monitored
Burglar Alarm or the modem in the SKY Digital
decoder may be interfering with this unit.
Disconnect the other equipment and try again. (for
New Zealand)
Caller information is
displayed or announced
late.
R Depending on your service provider/telephone
company, the unit may display or announce the
caller’s information at the 2nd ring or later.
R Move closer to the base unit.
65
Useful Information
TG76xxAZ(en)_0207_ver012.pdf 65 2012/02/07 15:34:49