Filter
Top Products
Special programming
Alarm
An alarm sounds at the set time for 3
minutes once or daily. Alarm can be set
for each handset.
Important:
R Set the date and time beforehand
(page 15).
1 MMENUN#720
2 MbN: Select the desired alarm option.
a MSELECTN
Off
Turns alarm off. Go to
step 7.
Once
An alarm sounds once at
the set time.
Daily
An alarm sounds daily at
the set time. Go to step 4.
3 Enter the desired month and date.
a MOKN
4 Set the desired time.
5 MAM/PMN: Select “AM” or “PM”. a
MOKN
6 MbN: Select the desired alarm tone.
a MSELECTN
R We recommend selecting a
different ringer tone from the one
used for outside calls.
7 MSELECTN a MOFFN
R When the alarm is set,
is
displayed.
Note:
R To stop the alarm, press MOFFN or
place the handset on the base unit or
charger.
R When the handset is in use, the alarm
will not sound until the handset is in
standby mode.
Night mode
Night mode allows you to select a period
of time during which the handset will not
ring for outside calls. This feature is
useful for time periods when you do not
want to be disturbed, for example, while
sleeping. Night mode can be set for
each handset.
Important:
R Set the date and time beforehand
(page 15).
R We recommend turning the base unit
ringer off (page 31, 33) in addition to
turning the night mode on.
R If you have set the alarm, the alarm
sounds even if the night mode is
turned on.
Turning night mode on/off
1 MMENUN#238
2 MbN: Select the desired setting. a
MSAVEN
R If you select “Off”, press MOFFN
to exit.
3 Enter the desired hour and minute
you wish to start this feature.
4 MAM/PMN: Select “AM” or “PM”. a
MOKN
5 Enter the desired hour and minute
you wish to end this feature.
6 MAM/PMN: Select “AM” or “PM”.
7 MSAVEN a MOFFN
R When the night mode is set,
is
displayed.
Changing the start and end time
1 MMENUN#237
2 Continue from step 3, “Turning night
mode on/off”, page 36.
36
Programming
TG76xxAZ(en)_0207_ver012.pdf 36 2012/02/07 15:34:47