Filter
Top Products
When you use the landline again
Before connecting the telephone line to
the base unit, select “Off” in step 2,
“Cellular line only mode (If you do not
use the landline)”, page 18.
Cellular line selection
This feature determines which cellular
line is selected to make cellular calls
when:
– you press MCELLN on the handset.
– you press M
N or M N on the
handset while the cellular line only
mode is turned on.
The following settings are available:
– “Manual” (default): You can select
the desired cellular line when making
a call.
– “Cellular phone 1”: CELL 1 is selected.
– “Cellular phone 2”: CELL 2 is selected.
1 MMENUN#634
2 MbN: Select the desired setting.
3 MSAVEN a MOFFN
Storing your area code (for
local call)
You need to add your area code when
making cellular calls to a phone number
in your area. Once you store your area
code, it is automatically added to the
beginning of the 8-digit (for Australia)/
7-digit (for New Zealand) phone number
when making cellular calls.
1 MMENUN#633
2 Enter the 3-digit area code.
R To correct a digit, press MCLEARN.
3 MSAVEN a MOFFN
Changing the Bluetooth PIN
(Personal Identification
Number)
The PIN is used to register cellular
phones to the base unit. The default PIN
is “0000”. To prevent unauthorised
access to this product, we recommend
that you change the PIN, and keep it
confidential.
Important:
R Please make note of your new PIN.
The unit does not reveal the PIN to
you. If you forget your PIN, see
page 70.
1 MMENUN#619
2 Enter the new 4-digit PIN. a MOKN
3 Enter the new 4-digit PIN again. a
MSAVEN
4 MOFFN
Changing the PIN for the second time
Follow step 1, “Changing the Bluetooth
PIN (Personal Identification Number)”,
page 19. Enter the current 4-digit PIN,
then continue from step 2.
Deregistering Bluetooth
devices
A handset can cancel the registration of
another Bluetooth device (cellular phone
or headset) that is stored to the base
unit.
1 MMENUN#134
2 MbN: Select the desired device. a
MSELECTN
R
indicates a cellular phone, and
indicates a headset.
3 MbN: “Yes” a MSELECTN
R When the cellular phone is
deregistered, the CELL 1 or CELL
2 indicator is turned off.
19
Link to Cell
TG76xxAZ(en)_0207_ver012.pdf 19 2012/02/07 15:34:46