Filter
Top Products
Character entry
The
dial keys are used to enter characters and numbers. Each dial key has multiple characters
assigned to it. The characters that can be entered depend on the character entry mode
(page 43).
– Press MFN or MEN to move the cursor left or right.
– Press dial keys to enter characters and numbers.
– Press MCN to erase the character or number highlighted by the cursor. Press and hold MCN to
erase all characters or numbers.
– Press * (Aaa) to switch between uppercase and lowercase.
– If you do not press any dial key within 5 seconds after entering a character, the character is
fixed and the cursor moves to the next space.
– When entering another character located on the same dial key, operation will differ depending
on the display language you select.
English
R Press MEN to move the cursor to the next space, then press the appropriate dial key.
Arabic/Persian
R Press MFN to move the cursor to the next space, then press the appropriate dial key.
Character entry modes
The
available character entry modes are Alphabet (ABC), Numeric (0-9), Arabic/Persian (
)
a
n
d
Extended (
). When in these entry modes except Numeric, you can select which
cha
racter is entered by pressing a dial key repeatedly.
When the unit displays the character entry screen:
MR/ECON a MbN: Select a character entry mode. a MOKN
Note:
R
in the following tables represents a single space.
R Whe
n you select Arabic or Persian as the display language, numbers in the character table
are displayed in Arabic or Persian.
Alphabet character table (ABC)
z
y
1
2 3 4 5 6 7 8 9
Numeric entry table (0-9)
z
y
1
2
3
4 5 6 7 8 9
43
Useful Information
TG68xxBX_UE(en)_0523_ver021.pdf 43 2013/05/23 16:41:17