Filter
Top Products
Programming
24
Programming using the direct commands
1
8 i {#}
2 Enter the desired code.
3 Select the desired setting. i M
L This step may vary depending on the feature being programmed.
L To exit the operation, press {ic}.
Note:
L In the following table, < > indicates the default settings.
Feature Code Setting Page
Caller List {2}{1}{3} –30
Set Date/Time {1}{0}{1} –13
Alarm {7}{2}{0}{1}: Once {2}: Daily
{0}: <Off>
27
Time Adjustment
*1
{2}{2}{6}{1}: Caller ID
{0}: <Manual>
–
Intercom {2}{7}{4} –39
Ringer Volume
*2
(Handset)
{1}{6}{0}{1}–{6}: Level 1–6 <6>
{0}: Off
–
Ringtone
*3,
*4
(Handset)
{1}{6}{1} <Ringtone 1>–
Handset Name {1}{0}{4} –27
Caller Barred
*5
{2}{1}{7} –28
Transmission Power {7}{2}{5}{1}: <Normal>
{2}: Low
13
LCD & Key Backlight {2}{7}{6}{1}: <On> {0}: Off –
Contrast
(Display contrast)
{1}{4}{5}{1}–{6}: Level 1–6 <3> –
Keytones
*6
{1}{6}{5}{1}: <On> {0}: Off –
Area Code {2}{5}{5} –27
Auto Talk
*7
{2}{0}{0}{1}: On {0}: <Off>16
Dial Mode {1}{2}{0}{1}: Pulse
{2}: <Tone>
13
TG6551-6561BX(e).book Page 24 Friday, July 23, 2010 10:06 AM