Filter
Top Products
Base Unit Speed Dial
21
Base unit speed dial
You can assign one phone number to
each of the 10 dial keys ({0} – {9}) on
the base unit.
Adding phone numbers to
speed dial
Important:
L Before adding phone numbers, make
sure the base unit is not in use.
1 {l}
L The in use indicator flashes.
2 Enter the phone number (24 digits
max.).
L If a pause is required for dialling,
press {R/P} where needed
(page 15).
L If you enter incorrectly,
– continue and finish step 4, then
start again from step 1.
– press {■}, then start again from
step 1. (KX-TG6561)
3 {l}
4 Press a dial key ({0} – {9}) to
assign.
L A long beep is heard and the in
use indicator stops flashing.
Note:
L If a phone number is assigned to a dial
key which already contains a phone
number, the old number will be
erased.
L We recommend you make a note of
which phone numbers are stored in
which dial keys.
To erase a stored phone number
1 {l} 2 times
2 Press the desired dial key ({0} –
{9}).
Making a call using the speed
dial keys
1
■ KX-TG6551:
{s} i {$}
■ KX-TG6561:
{s} i {l}
2 Press the desired dial key ({0} –
{9}).
Note:
L Speed dial numbers can only be
dialled from the base unit.
TG6551-6561BX(e).book Page 21 Friday, July 23, 2010 10:06 AM