Filter
Top Products
Useful Information
For assistance, please visit http://www.panasonic.com/help 41
5 Connect the telephone line cord.
Mount the unit by inserting the
mounting pins into the round
openings on the adaptor (for pin 2,
use round cut out at the bottom of the
adaptor if you are using the 4 inches
phone plate), then sliding the unit
down to secure it.
Connect the AC adaptor to power
outlet (page 9).
LThere are two common types of
wall phone plates. The distance
between 1 and 2 may vary
depending on the size of the wall
phone plate installed.
To remove the wall mounting adaptor
While pushing down the release levers
(A), remove the adaptor (B).
Charger
1
Drive the screws (not included) into
the wall.
2 Mount the charger (A), then slide it
down (B) and to the right (C) until it
is secure.
83 mm
(3
1
/
4
inches)
or
102 mm
(4 inches)
(120 V AC,
60 Hz)
83 mm
(3
1
/4 inches)
102 mm
(4 inches)
AC adaptor cord
Available model:
KX-TG6072/KX-TG6073/KX-TG6074
25.4 mm
(1 inch)
Screws
(120 V AC, 60 Hz)
A
B
C
TG607X.book Page 41 Tuesday, December 12, 2006 1:56 PM