Filter
Top Products
Voice Mail Service
For assistance, please visit http://www.panasonic.com/help 37
Listening to Voice Mail
messages
The unit lets you know that you have
new Voice Mail messages in the
following ways:
–“New Voice Mail” is displayed on
the handset.
– The message indicator on the
handset flashes slowly if message
alert feature is turned on (page 37).
1 Press {C}, then press {VM} within
15 seconds.
OR
{MENU} i{V}/{^}: “V.M.
access” i {Select}
LThe speakerphone turns on.
2 Follow the prerecorded instructions.
3 When finished, press {OFF}.
Note:
LIf {VM} is not displayed, the Voice
Mail access number has not been
stored. Store the number (page 36).
LIf the handset still indicates there are
new messages even after you have
listened to all new messages, turn it
off by pressing and holding {OFF}
until the handset beeps.
LIf your Voice Mail service uses Voice
Mail tones and the message is over 3
minutes long, the handset may not
indicate new messages.
LIf your Voice Mail service uses Voice
Mail tones, the tones are heard from
any phone connected to the same
line. If you want to use another phone
to listen to Voice Mail messages, you
have to dial your access number
manually.
Message alert
You can select whether or not the
message indicator on the handset
flashes slowly when there are new
recorded messages in the Voice Mail
system.
The default setting is “Off”.
Important:
LIf there are new answering system
messages present (page 30), the
message indicator also flashes
slowly.
1 {MENU} i {0}{#}
2 {V}/{^}: Select the desired setting.
3 {Save} i {OFF}
Note:
LWhile message alert is on, battery
operating time is shortened (page 11).
Handset
Handset
TG607X.book Page 37 Tuesday, December 12, 2006 1:56 PM