Filter
Top Products
Answering System
32
Listening to messages
using the handset
When new messages have been
recorded:
–“New message” is displayed.
– The message indicator on the
handset flashes slowly if the message
alert feature is turned on (page 35).
1 {MENU}
2 {V}/{^}: “Message play” i
{Select}
LThe handset plays new messages.
LWhen you have no new messages,
the handset plays back all
messages.
3 When finished, press {OFF}.
Note:
LTo switch to the receiver, press {C}.
Voice guidance
If you do not press any buttons after the
last message is played back, the
handset’s voice guidance starts.
Operate the answering system by
following the guidance as necessary.
Calling back (Caller ID subscribers
only)
If Caller ID information was received for
the call, you can call the caller back
while listening to the message.
1 Press {Select} during playback.
LTo edit the number, press {Edit},
then edit the number (see step 3
on page 23, “Editing a caller’s
phone number before calling
back”).
2 {Call}
Operating the answering
system
You can also operate the answering
system by pressing dial keys on the
handset during playback.
*1 If pressed within the first 5 seconds
of a message, the previous
message is played.
*2 To resume operation, press a
command key within 15 seconds, or
the voice guidance will start.
Key Operation
{^} or {V} Adjust the receiver/
speaker volume
{1} or {<} Repeat message
(during playback)
*1
{2} or {>} Skip message (during
playback)
{4} Play new messages
{5} Play all messages
{8} Turn answering system
on
{9} Stop playback
*2
{0} Turn answering system
off
{*}{4} or
{Erase}
Erase message
currently playing
{*}{5} Erase all messages
TG605xAL.book Page 32 Thursday, September 27, 2007 5:49 PM