Filter
Top Products
Useful Information
35
Battery recharge
Making/answering calls, intercom
*1 KX-TG6022
Problem Cause/solution
I fully charged the battery,
but 7 continues to flash,
or 8 is displayed.
LClean the charge contacts and charge again
(page 10).
LThe battery may need to be replaced with a new
one (page 10).
The handset display is
blank.
LConfirm that the battery is properly installed.
LFully charge the battery (page 10).
While charging, the charge
indicator does not light and
“Charge for 7h” is
displayed.
LThe battery is empty. The charge indicator does
not light in order to concentrate on charging.
After about 5 minutes, the charge indicator lights
and “Charging” is displayed.
Problem Cause/solution
Static is heard, sound cuts
in and out. Interference
from other electrical units.
LMove the handset and base unit away from
other electrical appliances.
LMove closer to the base unit.
LTurn on the clarity booster feature (page 17).
LYour unit is connected to a telephone line with
ADSL (JetStream) service. We recommend that
you contact your ADSL service provider to have
an ADSL Splitter installed. We do not
recommend the use of generic ADSL filters.
Contact your ADSL provider for details.
The handset does not ring. LThe ringer volume is turned off. Adjust it (page
25).
I cannot make a call. LAnother handset is in use. Try again later.
*1
LIf the above remedy does not solve the problem,
set the dialling mode. Press {MENU}{0}{5}
{1}{Save}{OFF}.
LThe unit is not designed to be used with rotary
(pulse dialling) services.
I cannot have a
conversation using the
headset.
LMake sure that an optional headset is
connected properly (page 32).
LIf “SP-phone” is displayed on the handset,
press {C} to switch to the headset.
I cannot page the handset. LThe called handset is too far from the base unit.
LThe called handset is in use. Try again later.