Filter
Top Products
Useful Information
33
Error messages
If the unit detects a problem, one of the following messages is shown on the display.
*1 KX-TG6022
Display message Cause/solution
Busy LThe called unit is in use.
*1
LThe handset you tried to copy phonebook items to
is in use. Try again later.
*1
LThe handset you are calling is too far from the
base unit.
*1
Error!! LThe handset’s registration has failed. Move the
handset and base unit away from all electrical
appliances and try again.
LAnother handset user tried to send phonebook
items to you but there was an error. Have the other
handset user re-send the items to you (page 19).
*1
---Incomplete---
Phonebook full
LThe destination handset’s phonebook memory is
full. Erase unnecessary items from the destination
handset’s phonebook (page 19).
*1
Invalid LAnother handset’s registration may have been
cancelled. Re-register the handset (page 37).
*1
No items stored LYour phonebook or redial list is empty.
No link to base.
Move closer to
base, try again.
LThe handset has lost communication with the base
unit. Move closer to the base unit, and try again.
LConfirm that the base unit’s AC adaptor is plugged
in.
LThe handset’s registration may have been
cancelled. Re-register the handset (page 37).
Phonebook full LThere is no space to store new items in the
phonebook. Erase unnecessary items (page 19).
Please lift up and
try again.
LA handset button was pressed while the handset
was on the base unit or charger. Lift the handset
and press the button again.
System is busy.
Please try again
later.
LOther units are in use and the system is busy. Try
again later.
LThe handset’s registration may have been
cancelled. Re-register the handset (page 37).
*1
Store VM access# LYou have not stored the Voice Mail access
number. Store the number (page 28).