Filter
Top Products
Caller ID Service
22
1 {MENU} i {0}{4}
2 Enter your area code (max. 8 digits).
LTo correct a digit, press {<} or {>}
to move the cursor, then press
{Clear}. Enter the correct number.
3 {Save} i {OFF}
Note:
LThe use of this feature can prevent a
National Call from being dialled.
For example, the “03” for South Island
callers will be omitted and will
therefore prevent a National Call to
other areas of the South Island.
To erase your area code
Press and hold {Clear} in step 2, press
{Save}, then press {OFF}.
Editing a caller’s phone
number before calling back
You can edit a phone number in the
caller list.
1 {View CID}
2 {V}/{^}: Select the desired item. i
{Select} i {Edit}
3 Add or erase digits to the beginning
of the number as necessary.
LTo add a digit, press the desired
dial key.
LTo erase a digit, press {Clear} or
{#}.
4 {C}
Note:
LThe edited phone number is not
saved in the caller list.
Storing caller information
into the phonebook
1
{View CID}
2 {V}/{^}: Select the desired item. i
{Select}
LTo edit the number, press {Edit},
then edit the number (see step 3
on page 22, “Editing a caller’s
phone number before calling
back”).
3 {Save}
LIf there is name information for the
caller, skip to step 5.
4 Enter the name (see the character
table, page 18). i {Next} i
{Save}
5 {OFF}
Erasing selected caller
information
1
{View CID}
2 {V}/{^}: Select the desired item.
3 {Erase} i {Yes} i {OFF}
Erasing all caller information
1 {View CID}
2 {All erase} i {Yes}