Filter
Top Products
Base Unit Speed Dialler
35
Base unit speed dialler
You can assign one phone number to each
of the 10 dial keys ({0} – {9}) on the base
unit.
Adding phone numbers to the
speed dialler
Important:
L Before adding phone numbers, make
sure the base unit is not being used.
1 {PROGRAM}
2 Enter the phone number (max. 32
digits).
L If a pause is required for dialling,
press {PAUSE} where needed.
L If you misdial, press {PROGRAM} 2
times and repeat from step 1.
3 {PROGRAM}
4 Press a dial key ({0} – {9}).
Note:
L If a phone number is assigned to a dial
key which already contains a phone
number, the old number will be erased.
L We recommend you make a note of
which phone numbers are stored in
which dial keys.
PAUSE button (for PBX/long distance
service users)
A pause is sometimes required when
making calls using a PBX or long distance
service.
For example, if you need to dial the line
access number “9” when making outside
calls with a PBX:
In step 2, press {9}, {PAUSE}, then enter
the phone number.
Note:
L A 3.5 second pause is inserted each
time {PAUSE} is pressed. Press
repeatedly to insert longer pauses.
To erase a stored phone number
1 Press {PROGRAM} 2 times.
2 Press the desired dial key ({0} – {9}).
Calling someone with the speed
dialler
1 {SP-PHONE} i {AUTO}
2 Press the desired dial key ({0} – {9}).
Note:
L Speed dial numbers assigned to the
base unit dial keys can only be dialled
from the base unit.
TG5961AL.book Page 35 Friday, June 9, 2006 5:44 PM