Filter
Top Products
Useful Information
60
Answering system
Battery charge
Problem Cause & solution
I cannot listen to
messages from a remote
location.
LA touch tone phone is required for remote operation.
LPress the remote code correctly and press each key
firmly (page 47).
LThe answering system is off. Turn it on (page 48).
The other party
complains that they
cannot leave a voice
message.
LThe recording time is set to “Greeting only”. Select
“1min”, “2min”, or “3min” (page 50).
LThe memory is full. Erase unnecessary messages
(page 44).
“E” flashes and the
ANSWER ON indicator
flashes rapidly. No new
messages are recorded.
LMessage memory is full. Erase unnecessary messages
(page 44).
I cannot operate the
answering system.
LSomeone is operating the answering system.
LIf someone is talking on a conference call, you cannot
operate the answering system. Try again later.
During message
playback, the unit rings
and cancels playback.
LA call is being received. Answer the call and start again
from the beginning after hanging up.
The message indicator
on the handset flashes
slowly.
LNew messages have been recorded. Listen to the new
messages (page 44) or turn the message alert off (page
50).
When you play back
messages or turn on the
answering system, the
base unit and handset
announce the day and
time incorrectly.
LSet the date and time again (page 17).
Problem Cause & solution
“Recharge battery” is
displayed, 7 flashes
or the handset beeps
intermittently.
LFully charge the battery (page 12).
“Charge for 6h” and
8 are displayed and
the handset does not
work.
LThe battery has been discharged. Fully charge the
battery (page 12).
TG5838_5839AL.book Page 60 Tuesday, March 15, 2005 9:30 PM