Filter
Top Products
Answering System Features
46
Calling back (Caller ID subscribers
only)
If Caller ID information was received for
the call, you can call the caller back while
listening to a message.
Press {Call} during playback.
Note:
LTo edit the number before calling back,
press {Edit} and edit the number (page
28). Press {Call}, {C}, or {s}.
Memory capacity
The total recording capacity (including
your greeting message and caller
messages) is about 15 minutes. A
maximum of 64 messages (including a
greeting message) can be recorded.
LIf message memory becomes full:
–“E” flashes on the base unit.
– the ANSWER ON indicator flashes
rapidly (if the answering system is
turned on).
– the unit announces “Memory full”
when operating the answering
system.
To record additional messages, erase
unnecessary messages.
LIf less than 3 minutes of recording time is
available, the unit will announce the
remaining recording time when
operating the answering system.
LMessages are retained even if a power
failure occurs. All messages are saved
until you erase them. (Flash memory
message backup)
LThe total recording capacity may be
reduced by the calling party’s
background noise.
TG5838_5839AL.book Page 46 Tuesday, March 15, 2005 9:30 PM