Filter
Top Products
Programmable Settings
39
LHave the handset and base unit near
each other when re-registering the
handset.
LKX-TG5839AL only:
Confirm the extension number of the
handset which has lost the
communication by placing the handset
on the base unit or charger.
If you re-register the handset using the
other handset’s extension number [1]
or [2], the other handset will not
function.
1 Handset:
Press {MENU}.
2 Scroll to “Initial setting” by
pressing {V} or {^}, then press {>}.
3 Scroll to “Registration” by pressing
{V} or {^}, then press {>}.
4 KX-TG5838AL base unit:
Press and hold {LOCATOR/
INTERCOM} until the CHARGE
indicator flashes.
KX-TG5839AL base unit:
Press and hold the locator/intercom
button that corresponds to the handset
you want to re-register ({LOCATOR/
INTERCOM 1} or {LOCATOR/
INTERCOM 2}) until the registering
handset number (H1 or H2) is
displayed.
LAfter the CHARGE indicator starts
flashing, the rest of the procedure
must be completed within 1 minute.
5 Handset:
Press {OK}, then wait until the handset
beeps.
LRegistration is complete.
Time adjustment (Caller ID
subscribers only)
Using this feature, the unit’s date and time
setting will be automatically adjusted when
caller information is received. To turn this
feature on, select “Caller ID[auto]”
(default). To turn off, select “Manual”.
1 Press {MENU}.
2 Scroll to “Initial setting” by
pressing {V} or {^}, then press {>}.
3 Scroll to “Time adjustment” by
pressing {V} or {^}, then press {>}.
4 Press {V} or {^} repeatedly to select
“Manual” or “Caller ID[auto]”.
5 Press {Save}, then press {OFF}.
Note:
LTo use this feature, set the date and time
manually first (page 17).
TG5838_5839AL.book Page 39 Tuesday, March 15, 2005 9:30 PM