Filter
Top Products
Programmable Settings
14
Display Language
You can select either “English” or “Français” (French) as the display language. The
factory preset is “English”.
• If you select a language you cannot read, change the display language again
using direct commands (p. 47).
Dialing Mode
If you have touch tone service, set the dialing mode to “Tone”. For rotary or pulse
service, set to “Pulse”. The factory preset is “Tone”.
1 Press [MENU].
2 Scroll to “Initial setting” by pressing
[d] or [B], then press the soft key ( ).
3 Scroll to “Change language” by pressing
[d] or [B], then press the soft key ( ).
4 To change from English to French, press the
soft key ( ).
To change from French to English, press the
soft key ( ).
• The display changes to the selected language.
• You can also select the display language by
pressing [d] or [B].
5
When
French
is selected, press the soft key ( ), then press
[OFF]
.
When English is selected, press the soft key ( ), then press
[OFF]
.
1 Press [MENU].
2 Scroll to “Initial setting” by pressing
[d] or [B], then press the soft key ( ).
3 Scroll to “Set tel line” by pressing [d] or
[B], then press the soft key ( ).
4 Press the soft key ( ) at “Set dial
mode”.
5 Select “Pulse” or “Tone” by pressing [d] or
[B].
6 Press the soft key ( ), then press [OFF].
Handset
SELECT
Initial setting
SELECT
Change language
FRANÇ.
ENGLISH
Display
:English
SAUV
.
SAVE
Handset
SELECT
Initial setting
SELECT
Set tel line
SELECT
Set dial mode
Set dial mode
:Tone
SAVE
TG5050CE.fm.fm Page 14 Thursday, June 24, 2004 3:55 PM