Filter
Top Products
Installation
10
Installing the Battery in the Handset
Insert the battery (1) and press it down until it snaps into the compartment (2).
Close the cover.
To replace the battery:
Press the notch on the cover firmly and slide it as
indicated by the arrow. Replace the old battery with a new
one (p. 11). Close the cover and charge the handset for 6
hours.
Battery Charge
Place the handset on the base unit for 6
hours before initial use. Repeat charging
will require approximately the same
amount of charging time (6 hours) if the
battery is depleted completely.
• The unit beeps once, the CHARGE indicator
lights and “Charging” is displayed.
• When the battery is fully charged, “Charge
completed” is displayed if there are no
new calls in the Caller List.
Battery strength
You can confirm the battery
strength on the handset
display.
Battery strength is indicated
by the icons shown in the
chart to the right.
Display prompt Battery strength
1 Fully charged
2 Medium
3 Low
(flashing) Needs to be recharged.
4 Discharged
1
2
CHARGE Indicator
3
TG5050CE.fm.fm Page 10 Thursday, June 24, 2004 3:55 PM