Filter
Top Products
2 Enter the desired name (max. 10
characters; see the character table,
page 20).
R If not required, go to step 3.
3 MSAVEN
4 MbN: Select the desired setting. a
MSELECTN 2 times
5 MOFFN
Call block (Call Display
subscribers only)
This feature allows the unit to reject calls when:
– the unit receives a call from a phone
number stored in the call block list as
unwanted (“Storing unwanted callers”,
page 29).
– the unit receives a call without phone
number (“Blocking incoming calls without
phone number”, page 29).
When a call is received, the unit rings for a
short time while the caller is being identified. If
the phone number matches an entry in the call
block list, the unit sends out a busy tone to the
caller, and then disconnects the call.
Important:
R When the unit receives a call from a
number that is stored in the call block list or
a call without a recognized phone number,
the call is logged in the caller list
(page 33) with after the call is
disconnected.
Storing unwanted callers
You can store up to 30 phone numbers in the
call block list.
Important:
R We recommend storing 10 digits (including
an area code). If only 7 digits are stored, all
numbers that have the same last 7 digits
will be blocked.
n From the caller list:
1 MFN CID
2 MbN: Select the entry to be blocked.
R To edit the number, press MEDITN
repeatedly until the phone number
is shown in the 10-digit format.
3 MSAVEN
4 MbN: “Call block” a MSELECTN
5 MbN: “Yes” a MSELECTN
6 Edit the phone number if necessary
(24 digits max.).
7 MSAVEN a MOFFN
n By entering phone numbers:
1 MMENUN#217 a MADDN
2 Enter the phone number (24 digits
max.).
R To erase a digit, press MCLEARN.
3 MSAVEN a MOFFN
Blocking incoming calls without
phone number
You can reject a call when no phone number
is provided, such as a call just showing
“Unavailable”.
1 MMENUN#240
2 MbN: Select the desired setting. a
MSAVEN a MOFFN
Viewing/editing/erasing call block
numbers
1 MMENUN#217
2 MbN: Select the desired entry.
R To exit, press MOFFN.
3 To edit a number:
MEDITN a Edit the phone number. a
MSAVEN a MOFFN
To erase a number:
MERASEN a MbN: “Yes” a MSELECTN
a MOFFN
Note:
R When editing, press the desired dial key to
add, MCLEARN to erase.
R When viewing, “Block w/o num” is
displayed if the blocking incoming calls
without phone number feature is turned on.
To turn the feature off: MERASEN a MCN
a MSAVEN a MOFFN
29
Programming
TG47xxC(en)_1212_ver021.pdf 29 2011/12/12 14:19:46