Filter
Top Products
Programmable settings
You can customize the unit by programming the following features using the handset.
To access the features, there are 2 methods.
n Scrolling through the display menus
1 MMENUN
2 Press MCN or MDN to select the desired main menu. a MSELECTN
3 Press MCN or MDN to select the desired item from the next sub-menus. a MSELECTN
4 Press MCN or MDN to select the desired setting. a MSAVEN
R This step may vary depending on the feature being programmed.
R To exit the operation, press MOFFN.
n Using the direct command code
1 MMENUN a Enter the desired code.
Example: Press MMENUN#101.
2 Select the desired setting. a MSAVEN
R This step may vary depending on the feature being programmed.
R To exit the operation, press MOFFN.
Note:
R In the following table, < > indicates the default settings.
R In the following table,
indicates the reference page number.
R Display menu order and sub-menu may vary depending on your model.
Display the menu tree and direct command code table
Main menu: “Caller list”
Operation Code
Viewing the caller list. #213 33
Main menu: “Answering device”
*1
Sub-menu 1 Sub-menu 2 Settings Code
Play new msg.
(msg.: message)
– – #323 37
Play all msg.
– – #324 37
Erase all msg.
*2
– – #325 37
Greeting
Record greeting
*2
– #302 36
Check greeting
– #303 36
Pre-recorded
*2
(Reset to pre-recorded
greeting)
– #304 36
23
Programming
TG47xxC(en)_1212_ver021.pdf 23 2011/12/12 14:19:44