Filter
Top Products
Useful Information
36
Error messages
If the unit detects a problem, one of the following messages will be displayed on the
handset.
Display message Cause & solution
Error!! L When you tried to register the handset, the handset and
the base unit could not link for some reason, such as
interference from electrical appliances. Move the handset
and the base unit away from the electrical appliances and
try again.
L The entered password was wrong in programming dial
lock. Enter the correct password.
No link to base.
Move closer to
base, try again.
L The handset has lost communication with the base unit.
Move closer to the base unit, and try again.
L Confirm that the base unit’s AC adaptor is plugged in.
L Raise the base unit antenna.
L The handset’s registration may have been cancelled. Re-
register the handset (page 31).
Phonebook full L There is no space to store new items in the phonebook.
Erase unnecessary items (page 23).
No items stored L Your phonebook or redial list is empty.
Please lift up
and try again.
L A handset button was pressed while the handset was on
the base unit. Lift the handset and press the button again.
System is busy.
Please try again
later.
L The handset has lost communication with the base unit.
Move closer to the base unit and try again.
Dial locked L Dial lock is turned on. To turn it off, see page 31.