Filter
Top Products
Programmable Settings
27
Guide to handset programming
For your reference, a chart of all programmable functions is printed below. Details for each
item can be found on the corresponding pages. To programme, press {MENU}, press {V}
or {^} to scroll through the menu, and press {>} or {Select} when the desired menu item
or setting is displayed.
Important:
L Before programming, make sure the handset and base unit are not being used. The
handset must be operated near the base unit and while off the base unit.
Note:
L To exit programming, press {OFF} at any time.
L To go back to the previous menu, press {<} or {Back}, or press {>} or {Select} while
“(Go back)” is displayed.
Main menu Sub-menu 1 Sub-menu 2 Page
Ringer setting Ringer volume – page 28
Ringer tone – page 28
Voice enhancer – – page 29
Dial lock – – page 31
Initial setting LCD contrast – page 29
Key tone – page 31
Auto talk – page 29
Set area code – page 30
Set tel line Set dial mode page 38
Set recall time page 30
Set line mode page 30
Registration – page 31