Filter
Top Products
Voice Mail Service
46
• If the handset and the base unit still indicate that you have new messages even
after you have listened to them, turn the voice mail indicators off by pressing and
holding [OFF] until the handset beeps. “Voice Mail” will disappear on the
handset, the Ringer/Message Alert indicator will go out, and the VM indicator on
the base unit will go out.
• If your voice mail service uses a voice mail tone and the recorded message is
over 3 minutes long, the handset and base unit may not indicate that you have
new messages.
• If your voice mail service uses a voice mail tone, the tone will be heard from any
parallel connected phone. If you use another phone to retrieve messages, you
have to dial your access number manually.
1 Press [VM].
• The base unit is connected to the telephone line and dials the access number
(p. 43) in speakerphone mode.
• If the base unit beeps 3 times, a voice mail access number is not stored. To
store the number, see page 43.
2 Follow the pre-recorded instructions.
3 When finished, press [SP-PHONE].
Base Unit
PQQX14039ZA.book 46 ページ ２００４年２月１９日 木曜日 午前８時４５分