Filter
Top Products
38
Intercom
Intercom calls can be made between the handset and the base unit.
Making Intercom Calls
From
From
Using this feature, you can also locate a misplaced handset.
1 Press [HOLD/INTERCOM].
• The base unit will ring for 1 minute.
• To stop paging, press [OFF].
2 When the paged party answers, being
speaking.
• You can switch to the speaker by pressing [s]. To
switch back to the receiver, press [C].
3 To disconnect the intercom, press [OFF].
1 Press [LOCATOR/INTERCOM].
• The SP-PHONE indicator lights.
• The handset will ring for 1 minute.
• To stop paging, press [SP-PHONE] or [LOCATOR/INTERCOM].
2 When the paged party answers, speak into the MIC.
3 To disconnect the intercom, press [SP-PHONE] or
[LOCATOR/INTERCOM].
• The indicator light goes out.
During an intercom call:
• If you have difficulty hearing while using the handset speakerphone and base
unit speaker, decrease the speaker volume by pressing VOLUME [<] on the
base unit or [
d
] on the handset.
• If an incoming call is being received, you will hear two tones (incoming call
tone, page 52) and the IN USE indicator will flash rapidly on the base unit.
To answer the call;
— if using the handset, press [OFF], then [C] or [s].
— if using the base unit, press [SP-PHONE] twice.
Handset
Calling Base
Intercom
00-00-05
Mute
L
Base Unit
PQQX14039ZA.book 38 ページ ２００４年２月１９日 木曜日 午前８時４５分