Preparation
For assistance, please call: 1-800-211-PANA(7262)
17
Programmable Settings
Base unit ringer tone
(use either the handset or the base unit)
Make sure the base unit is not being used.
Setting the base unit ringer tone by using the
4 Select the desired ringer tone by pressing [
d
]
or [
B
].
• The handset will ring and the ringer tone will
change. If the ringer volume has been turned off,
the handset will not ring (p. 15).
• You can also select the ringer tone by pressing [1]
to [7].
5 Press Save, then press [OFF].
Press VOLUME [<] or [>], then select the desired ringer tone by pressing
[1] to [7].
[1] to [3] : Bell ringer patterns [4] to [7] : Melody patterns
• After pressing VOLUME [<] or [>], the base unit will ring using the current ringer
tone.
• The base unit will ring and the ringer tone will change.
• To stop ringing, press [0].
1 Press [MENU].
2 Scroll to “Initial setting” by pressing [
d
] or [
B
], then press
Select.
3 Scroll to “Set base unit” by pressing [
d
] or [
B
], then press Select.
4 Press Select at “Ringer tone”.
5 Select the desired ringer tone by pressing [
d
] or [
B
].
• The base unit will ring and the ringer tone will change. If the base unit ringer
volume has been turned off, the base unit will not ring (p. 16).
• You can also select the ringer tone by pressing [1] to [7].
6 Press Save, then press [OFF].
Ringer tone
1:Tone 1
Back Save
K
d
BL
Base Unit
Handset
PQQX13986YA.book 17 ページ 2004年1月22日 木曜日 午後5時40分