Filter
Top Products
Answering System Features (KX-TG1837 only)
34
Note:
L If you have stored the remote access
code, you can turn on answering system
by calling the unit even when it is turned
off.
Using the answering system
remotely
1
Dial your phone number from a touch
tone phone.
2 After the greeting message starts, enter
your remote access code.
L The unit will announce the number of
new messages.
L After 3 seconds, voice guidance starts.
3 Follow the voice guidance prompts as
necessary.
Note:
L You can hang up at any time.
L You can ignore the voice guidance and
control the unit using remote commands
(page 34).
Voice guidance
During remote operation, the unit’s voice
guidance will prompt you to press {1} to
perform a specific operation, or press {2} to
listen to more available operations.
Note:
L If less than 5 minutes of recording time is
available, the unit will announce the
remaining recording time after the last
message is played back.
Remote commands
You can press dial keys to access certain
answering system functions without waiting
for the voice guidance to prompt you.
Turning on the answering system
remotely
If the answering system is off, you can turn it
on remotely.
1 Dial your phone number from a touch
tone phone.
2 Let the phone ring 15 times.
L A long beep will be heard.
3 Enter your remote access code within 10
seconds after the long beep.
Key Remote command
{1} Repeat message (during
playback)
*1
{2} Skip message (during
playback)
{4} Play new messages
{5} Play all messages
{6} Play greeting message
{7} Record greeting
message
{9} Stop (recording,
playback)
{0} Turn answering system
off
{*}{4} Erase this message
(during playback)
{*}{5} Erase all messages
{*}{6} Erase greeting message
(during greeting
message playback)
{*}{#} End remote operation
(or hang up)
*1 If pressed within the first 5 seconds of
a message, the previous message will
be played.
TG1831-1837AL(e).book Page 34 Friday, February 3, 2006 2:24 PM