Filter
Top Products
Preparation
11
Displays
Display icons
Connections
When the AC adaptor is connected, a short
beep will be heard. If it is not heard, check
the connections.
Base unit
Charger (KX-TG1837 only)
Note:
L Never install telephone wiring during a
lightning storm.
L The AC adaptor must remain connected
at all times. (It is normal for the adaptor to
feel warm during use.)
L The AC adaptor should be connected to a
vertically oriented or floor-mounted AC
outlet. Do not connect the AC adaptor to a
ceiling-mounted AC outlet, as the weight
Display
icon
Meaning
w Within range of a base unit
L When flashing: Handset
is searching for base unit.
(out of range of base unit,
handset is not registered
to base unit, no power on
base unit)
L Handset is accessing base
unit. (intercom, paging,
changing base unit
settings, etc.)
k Handset is on an outside
call.
u Answering system is on.
*1
(page 31)
5 Battery strength
[2] Handset number (page 19)
F New SMS message
received
*2
L Line is being used by
another handset.
L Answering system is
being used by another
handset or the base
unit.
*1
*1 KX-TG1837 only
*2 SMS users only
Use only the included AC
adaptor and telephone line
cord.
(220–240 V, 50 Hz)
To telephone
network
Hook
(220–240 V,
50 Hz)
Hooks
Use only the included AC adaptor.
TG1831-1837AL(e).book Page 11 Friday, February 3, 2006 2:24 PM