Filter
Top Products
Answering System
31
For assistance, please visit http://www.panasonic.com/help
Answering system
The answering system can answer and record
calls for you when you are unavailable to answer
the phone.
You can also set the unit to play a greeting
message but not to record caller messages by
selecting “Greeting only” as the recording
time setting (page 35).
Important:
L Only 1 person can access the answering system
(listen to messages, record a greeting message,
etc.) at a time.
L When callers leave messages, the unit records
the day and time of each message. Make sure
the date and time have been set correctly (page
12).
Memory capacity
The total recording capacity (including your
greeting message) is about 18 minutes. A
maximum of 64 messages can be recorded.
Note:
L If message memory becomes full:
– “Messages full” is shown on the base unit
and handset display.
– The ANSWER ON indicator on the base unit
flashes rapidly when the answering system is
turned on.
L When the message memory becomes full:
– If you use the pre-recorded greeting
message, the unit automatically switches to
another pre-recorded greeting message
asking callers to call again later.
– If you recorded your own greeting message,
the same message is still announced to
callers even though their messages are not
recorded.
Turning the answering
system on/off
Press {ANSWER ON} to turn on/off the answering
system.
■ To turn on:
1 {MENU} i {#}{3}{2}{7}
2 {OFF}
■ To turn off:
1 {MENU} i {#}{3}{2}{8}
2 {OFF}
Note for base unit and handset:
L When the answering system is turned on, the
ANSWER ON indicator on the base unit lights
up.
Call screening
While a caller is leaving a message, you can listen
to the call through the base unit’s or handset’s
speaker. To adjust the speaker volume, press {^}
or {V} repeatedly.
You can answer the call by lifting the corded
handset from the base unit or pressing {C} on
the handset.
Note:
L To turn this feature off, see page 36.
Greeting message
When the unit answers a call, a greeting message
is played to callers.
You can use either:
– your own greeting message
– a pre-recorded greeting message
Recording your greeting message
1
{MENU} i {#}{3}{0}{2}
2 {V}/{^}: “Yes” i {SELECT}
3 After a beep sounds, hold the handset about
20 cm (8 inches) away and speak clearly into
the microphone (2 minutes 30 seconds max.).
4 Press {STOP} to stop recording.
5 {OFF}
= Base unit
Y Handset
= Base unit / Y Handset
Y Handset
TG106x(e).book Page 31 Friday, January 16, 2009 10:45 AM