Panasonic KXTG1062M Answering Machine User Manual


 
Programming
27
For assistance, please visit http://www.panasonic.com/help
Registering a unit
Operating additional units
Additional handsets
Up to 6 handsets can be registered to the base
unit.
Important:
L See page 4 for information on the available
model.
Registering a handset to a base unit
The supplied handset and base unit are pre-
registered. If for some reason the handset is not
registered to the base unit, re-register the handset.
1 Handset:
{MENU} i {#}{1}{3}{0}
2 Base unit:
Press and hold {LOCATOR} for about 5
seconds until the registration tone sounds.
L If all registered handsets start ringing, press
the same button to stop. Then repeat from
step 1.
L The next step must be completed within 90
seconds.
3 Handset:
Press {OK}, then wait until a long beep
sounds.
Note:
L When you purchase an additional handset, refer
to the additional handset’s installation manual
for registration.
Deregistering a handset
A handset can cancel its own registration (or the
registration of another handset) that is stored to
the base unit. This allows the handset to end its
wireless connection with the system.
1 {MENU} i {#}{1}{3}{1}
2 {3}{3}{5} i {OK}
3 Select the handset you want to cancel by
pressing the desired handset(s) number.
L The selected handset number(s) flashes.
L To cancel a selected handset number,
press the number again. The number will
stop flashing.
4 {OK} i {V}/{^}: Yes i {SELECT}
L When you cancel a different handset than
the one you are now using, press {OFF} to
exit.
TG106x(e).book Page 27 Friday, January 16, 2009 10:45 AM