Filter
Top Products
Phonebook
16
For assistance, please visit http://www.panasonic.com/help
Base unit/handset
phonebook
The phonebook allows you to make calls without
having to dial manually. You can add names and
phone numbers to the base unit and handset
phonebook independently, and assign each
phonebook entry to the desired group.
– Base unit: up to 100 entries
– Handset: up to 100 entries
Adding entries
1
{C}i {ADD}
2 Enter the party’s name (16 characters max.).
i {OK}
3 Enter the party’s phone number (24 digits
max.). i {OK}
4 {V}/{^}: Select the desired group. i
{SELECT} 2 times
L To add other entries, repeat from step 2.
5 Proceed with the operation for your unit.
Base unit: {■} (EXIT)
Handset: {OFF}
Note:
L Handset only: If you do not press any dial key
within 5 seconds after entering a character, the
character is fixed and the cursor moves to the
right.
L Caller ID subscribers can use group ringer tone
feature (page 28).
Character table for entering names
*1 Base unit only
*2 Handset only
L To enter another character that is located on the
same dial key:
Base unit: Press {8} to move the cursor to the
next space.
Handset: Press {V} to move the cursor to the
next space.
Correcting a mistake
1 Proceed with the operation for your unit.
Base unit: Press {7} or {8} to move the
cursor to the character or number you want to
erase.
Handset: Press {^} or {V} to move the cursor
to the character or number you want to erase.
2 Press {CLEAR}, and then enter the
appropriate character or number.
L Press and hold {CLEAR} to erase all
characters or numbers.
Groups
Groups can help you find entries in the phonebook
quickly and easily. When adding an entry to the
phonebook, you can assign it to one of 9 groups.
You can change the names of groups assigned for
phonebook entries (“Friends”, “Family”, etc.) and
then search for phonebook entries by group. The
group ringer tone feature is available for Caller ID
subscribers (page 28).
Changing group names
The default group name is “Group 1” to “Group
9”.
1 {C} i {MENU}
2 {V}/{^}: “Group” i {SELECT}
3 {V}/{^}: Select the desired group. i
{SELECT}
4 {V}/{^}: “Group name” i {SELECT}
= Base unit / Y Handset
Key Character
{1} Space # & ’ ( ) ; ,
–. / 1
{2} abcABC2
{3} def DEF3
{4} ghi GHI4
{5} jklJKL5
{6} mn o MNO6
{7} pqr sPQRS7
{8} tuvTUV8
{9} wxyzWXYZ9
{0} Space 0
{8}
*1
{V}
*2
To move the cursor to the right
{7}
*1
{^}
*2
To move the cursor to the left
= Base unit / Y Handset
Key Character
TG106x(e).book Page 16 Friday, January 16, 2009 10:45 AM