Filter
Top Products
1.2 Making Calls
User Manual 33
To cancel all message waiting indications left at another extension
To lock/unlock message waiting indications
• You can lock message waiting indications so that other extensions cannot confirm, call
back, or clear message waiting indications left at your extension (Message Waiting for
Another Extension Lock). The operator or manager can cancel this feature for all
extensions (Extension Lock—CANCEL ALL). Even while this lock is on, you can confirm,
call back, or clear message waiting indications left at your own extension.
• On your proprietary telephone (PT), you can establish one or more Message for another
extension buttons. These buttons can display message waiting indications left at other
telephones.
• To cancel all message waiting indications left at another extension, it is necessary to
first assign the corresponding Message for another extension buttons on your phone.
• The MESSAGE/Message for another extension button light or Message/Ringer Lamp
shows the current status as follows:
Off: No messages
Red on: New messages.
• The display shows messages in the order received, starting with the selected message.
<Example>
5→6→7→8→1→2→3→4
• Each extension can have a maximum of 8 messages waiting when using the Message
Waiting feature.
• If you go off-hook with a single line telephone (SLT) that has messages waiting, a special
dial tone (dial tone 3) will be heard. You can call a caller back or listen to the message by
entering the Message Waiting Answer feature number, "784# (7840)".
Off-hook.
Enter 70. Enter #.
PT
07
D.Tone
Dial extension number.
3
On-hook.
extension no.
C.Tone
Enter 3.
Off-hook.
On-hook.
PT/SLT
Enter 70. Enter lock code (4000–9999)
2 times to lock or one time to unlock.
Enter #.
07
C.Tone
Lock
Unlock
lock code lock code
lock code
An SLT user can enter "0"
instead of "#".
OR