Filter
Top Products
1.12 Exchanging the Settings between Extensions
166 User Manual
1.12 Exchanging the Settings between Extensions
1.12.1 Walking Extension
You can exchange the settings set at another extension with your own settings. This allows you to use your
own settings, including your extension number, on another person's extension. Settings such as extension
number and One-touch Dialling memory are available at the new extension. It is also possible to exchange
the DSS Console settings along with the extension settings. Walking Extension is useful, for example, when
you move to a new location in the office.
This feature is also known as Walking Station.
To exchange your settings with another extension
• An extension personal identification number (PIN) is required to use this feature. Refer to
"Assigning an Extension PIN to Your Extension (Extension PIN [Personal Identification
Number])" in "3.1.1 Customising Your Phone (Personal Programming)".
• Your previous extension will receive the old settings of your new extension.
• Extension settings can be exchanged between SLT and SLT, PT and PT, or SLT and PT.
• If you are using a KX-NT300 series telephone with a Bluetooth wireless headset, and
exchange the settings with another KX-NT300 series telephone user, you cannot use your
Bluetooth wireless headset at the other extension.
Bluetooth wireless headsets are registered on extensions themselves. Therefore, you have
to register a Bluetooth wireless headset on each desired extension. For details about
registration, refer to "Bluetooth Registration" in "3.1.2 Settings on the Programming Mode".
Off-hook.
Enter 727.
PT/SLT
your
extension no.
On-hook.
Dial your extension
number.
extension PIN
Enter extension PIN
(max. 10 digits).
2 77
D.Tone
PIN: Personal Identification Number