Panasonic KX-TCD515E Answering Machine User Manual


 
10
Setting up
Connection
Plug in the AC adaptor and the telephone
line cord in order
1
,
2
,
3
.
The AC adaptor must remain
connected at all times (It is normal for
the adaptor to feel warm during use).
Never install telephone wiring during a
lightning storm.
USE ONLY WITH Panasonic
AC ADAPTOR PQLV19E (Order No.
PQLV19EZ).
Battery Installation
Please ensure the batteries are inserted
as shown. part should be inserted first.
Close the cover as indicated by the arrow.
When you replace the batteries, part
should be removed first.
Battery Charge
At the time of shipment, the batteries are
not charged. To charge, place the
handset on the base unit. Please charge
the batteries for about 7 hours before
initial use.
During charging, the charge LED will light
as shown below.
During charging Fully charged
The handset which power is off will be
turned on automatically when it is placed
on the base unit.
The handset will not operate while it is
on the base unit.
If you do not recharge the handset battery
for more than 15 minutes, the display will
flash when the handset is lifted off
the base unit.
Do not connect the telephone line cord
to the phone socket
4 until the handset
is fully charged.
L
IN
E
1
4
3
2
Fasten the AC
adaptor cord to
prevent it from
being
disconnected.
Hook
Hooks
Display icon Battery strength
High
Medium
Low
Needs to be
charged
Red Green
515E_E.book Page 10 Friday, June 27, 2003 2:23 PM