Filter
Top Products
4.1 Troubleshooting
Installation Manual 83
4.1.4 System Restart
If the PBX does not operate correctly, confirm that the operation/feature is being used correctly and
refer to the Troubleshooting section if necessary. If the PBX still does not operate correctly, restart the
PBX.
When the PBX is restarted:
• Calls on Hold are terminated.
• Calls on Exclusive Hold are terminated.
• Calls in progress are terminated.
• Automatic Callback Busy (Camp-on) is cleared.
• Call Park is cleared.
• Last Number Redial is cleared.
• Saved Number Redial is cleared.
No other data is cleared by System Restart.
1. To restart the PBX, turn the Power Switch to the "OFF" position, then turn the Power Switch back
to the "ON" position.
Note
If the PBX still does not operate correctly, please see "4.1.5 System Reset with System Data
Clear".