Filter
Top Products
Useful Information
41
Wall mount template for the base unit
83 mm
4 Adjust the adaptor to hold the base unit, then push it in the direction of the arrow until
it clicks into place.
5 Drive the screws (not included) into the wall using the wall mount template (see below).
Connect the telephone line cord. Mount the unit, then slide it down.
LRaise the antennas.
83 mm
Screws (not included)
To telephone plug
connected to socket
TG5821_5822AL(e).book Page 41 Tuesday, March 15, 2005 8:05 PM