Filter
Top Products
Programmable Settings
37
Programming via direct commands
You can also programme most features using “direct commands”—special codes that take
you directly to the feature you wish to programme and allow you to select the desired
setting. There is no need to scroll through the unit’s menus.
Details of each feature can be found on the corresponding pages.
1 Press {MENU}.
2 Enter the desired feature code (shown below).
3 Enter the desired setting code (shown below).
LThis step may vary depending on the feature being programmed.
4 Press {Save}.
5 Press {OFF} to exit programming mode.
Direct commands chart
*1 KX-TG5822AL only
Feature Feature code Setting code Page
Ringer volume {1} {1}{1}: Low {2}: Medium
{3}: High {0}: Off
page 31
Ringer tone {1} {2}{1}–{3}: Tone pattern 1–3
{4}–{7}: Melody pattern 1–4
page 31
Interrupt tone
*1
{1} {3}{1}: On {2}: 2 times {0}: Off page 32
Voice enhancer {5}{1}: On {0}: Off page 32
Dial lock {6} Go to step 3 on page 35. page 35
Copy phonebook
(1 item)
*1
{#} {1} Go to step 4 on page 22 page 22
Copy phonebook
(all items)
*1
{#} {2} – page 23
LCD contrast {0} {1}{1}–{6}: Level 1–6 page 33
Key tone {0} {2}{1}: On {0}: Off page 35
Auto talk {0} {3}{1}: On {0}: Off page 32
Set area code {0} {4} Go to step 4 on page 34. page 34
Set dial mode {0} {5} {1} – page 46
Set recall time {0} {5} {2}{1}: 700 ms {2}: 600 ms
{3}: 400 ms {4}: 300 ms
{5}: 250 ms {6}: 110 ms
{7}: 100 ms {8}: 90 ms
page 33
Set line mode {0} {5} {3}{1}: A {2}: B page 34
Handset registration {0} {0} Go to step 4 on page 36. page 36
TG5821_5822AL(e).book Page 37 Tuesday, March 15, 2005 8:05 PM