Filter
Top Products
Intercom Features
69
For product assistance, visit www.globarange.com
For A assistance, visit www.joip.com
does not ring and the speakerphone is
automatically turned on. This allows you
to easily monitor a baby’s room, for
example, from different areas of the
house.
1 {MENU} i {#}{2}{7}{3}
2 {V}/{^}: Select the desired setting.
3 {SAVE} i {OFF}
Note:
L Auto intercom cannot be used when:
– your handset is receiving a
transferred outside call.
– all handsets are being paged by the
base unit.
Answering an intercom call using
auto intercom
1 When you are paged by another
handset, speak into the
microphone.
L To switch to the receiver, press
{s}.
2 To end the intercom, press { OFF}.
Monitoring audio in a room
You can listen to the sound in a room
where another handset is located.
Important:
L Before using this feature, set auto
intercom on the destination handset to
“On (Ringer Off)” to allow access
by other handsets.
1 Call the destination handset (page
68).
L You can listen to the audio.
2 To mute your sound output, press
{MUTE} if necessary.
3 Press {OFF} to stop monitoring.
Intercom features
between the handset
and base unit
Intercom calls
Intercom calls can be made between the
handset and base unit.
Note:
L If you receive an outside call while
talking on the intercom, the interrupt
tone sounds. To answer the call, press
{TEL} or {IP}. To turn the interrupt
tone off, see page 51.
L When paging unit(s) for an intercom
call, the paged unit(s) beeps for 1
minute.
Making an intercom call
1 {INTERCOM}
2 To page the base unit, press {0}.
L To stop paging, press {OFF}.
3 When you finish talking, press
{OFF}.
1 {INTERCOM}
2 To page a specific handset, enter its
extension number ({1} – {8}).
To page all handsets, press {0} or
wait for a few seconds.
L The paged handset(s) beeps for 1
minute.
L To stop paging, press
{INTERCOM}.
Available model:
BB-GT1540
Handset
Base unit
GT15xxC.book Page 69 Tuesday, July 24, 2007 7:17 PM