Filter
Top Products
Preparation
17
For product assistance, visit www.globarange.com
For A assistance, visit www.joip.com
Installation
Connecting to a landline and the Internet (IP line)
Connect the base unit to a broadband router or modem with a built-in router.
*1 Computer is not required for setup or making/answering internet calls.
1 Connect the included Ethernet cable until it clicks into the “LAN” port on the base
unit and unused Ethernet (LAN) port on your router or modem with a built-in
router.
2 Connect the included telephone line cord until it clicks into the “TEL” port on the
base unit and telephone line jack.
3 Connect the included AC adaptor to the base unit by pushing the plug firmly, then
plug the other end into the power outlet.
L Use only the included Panasonic AC adaptor PQLV203.
L The STATUS indicator on the base unit lights in red for about 3 seconds (page
22).
Hook
(120 V AC, 60 Hz)
To single-line
telephone jack
(RJ11C)
AC adaptor
3
1
2
Telephone
line cord
Ethernet cable
Router
Computer
(Optional) *1
Cable or
DSL modem
Internet
Press
plug firmly.
TEL
LAN
GT15xxC.book Page 17 Tuesday, July 24, 2007 7:17 PM