Answering System
59
For product assistance, visit www.globarange.com
For A assistance, visit www.joip.com
Greeting message
When the unit answers a call, callers are
greeted by a greeting message. You can
record your own greeting message or
use a prerecorded greeting message.
Recording your greeting
message f
You can record your own greeting
message (max. 2 minutes) that is played
when the answering system answers a
call.
The greeting messages can be
recorded:
– separately for either the IP line or
landline.
– for both the IP line and landline using
a common greeting.
If you do not record a greeting message,
a prerecorded greeting message is
used.
1 Press {IP/TEL} repeatedly until the
display shows the desired line(s)
(n and/or m).
2 {GREETING REC}
3 Within 10 seconds, press
{GREETING REC} again.
4 After the base unit beeps, speak
clearly about 20 cm (8 inches) away
from the MIC.
5 To stop recording, press {STOP}.
Using a prerecorded greeting
message
If you erase or do not record your own
greeting message, the unit plays a
prerecorded greeting message for
callers and asks them to leave
messages.
Playing back the greeting
message f
1
Press {IP/TEL} repeatedly until the
display shows the desired line(s)
(n and/or m).
2 {GREETING CHECK}
Erasing your greeting
message f
1
Press {IP/TEL} repeatedly until the
display shows the desired line(s)
(n and/or m).
2 Press {GREETING CHECK}, and
then press {ERASE} while your
greeting message is playing.
Listening to messages
using the base unit
When new messages have been
recorded, {6} on the base unit flashes.
Press {6} (centre of navigator key).
L The base unit plays new messages
including voice memos.
L When you have no new messages,
the base unit plays back all
messages.
Playing back messages for the
desired line(s)
1 Press {IP/TEL} repeatedly until the
display shows the desired line(s)
(n and/or m).
2 Press {6 } (centre of navigator key).
Note:
L If you select the line(s), voice memos
are not played (page 61).
GT15xxC.book Page 59 Tuesday, July 24, 2007 7:17 PM